Showing posts with label sheet metal. Show all posts
Showing posts with label sheet metal. Show all posts

Sunday, June 18, 2023

Creating Complex Sheet Metal Cutouts in Fusion 360

You are sometimes faced with creating a cutout in sheet metal through multiple thicknesses and bends.  Normally you would Unfold command on the sheet metal body, sketch on the flat, Extrude and Refold the layout but in this case lining up the multiple sketches will be difficult if not impossible.  In this short video I will show you how to use a surface to easily create a perfect cutout.




Friday, March 22, 2019

Creating Conical Sheet Metal Components

Autodesk Fusion 360 does not provide a method for making conical sheet metal components but with the available tools and a little bit of surface work, the process can accomplished easily.  In this short video I first create a simple sheet metal cone with its flat pattern.  I then go back, in the timeline, and show you how to used the process to make a truncated cone that will produce a square edged flat pattern.

A special thanks to "TheCADWhisper", also known as "Top Daug" from the Fusion 360 forum for giving me inspiration into the methods outlined in this article.

UPDATE: Fusion 360 has added a new tool called Lofted Flange which makes the creation of a sheet metal cone very easy.  In this video I go over the process of using this tool.  If you desire to create an angled truncated cone, the process is also outlined in the video as it is a little different than the method outlined above.


Thursday, August 10, 2017

Creating Sheet Metal Flat Pattern of Round Object in Autodesk Fusion 360

Update (9/19): The method shown below is not required to create a flat pattern of a cylindrical component in the latest version of Fusion 360.  Selecting on the inside or outside face of the cylinder, as the stationary face, is now all that is required.  If you desire to use the Unfold tool, the method outlined in the blog and video still must be used.
----------------------------------------------------------------------------------------------------------- Autodesk recently released an update to their Fusion 360 application.  This update contained many wonderful enhancements and new features, one of these was the long awaited sheet metal environment.  The sheet metal environment is very versatile and can make most sheet metal forms and the flat patterns needed to fabricate them. 

There is one exception to creating a flat pattern and that is for cylindrical objects such as the sheet metal part below.  If you are wondering how to make the part with only the "Flange" command, apply it to an arc creating what you call a contour flange in Inventor.


Fusion 360 "Create Flat Pattern" command requires a flat surface along the surface to be unfolded.  Since this cylinder does not have one, you cannot execute the command on it.  The solution is to add a very small flat to the edge of the cylindrical surface.  I have created short video to illustrate this process.  Click the LINK to view.

By the way, this same technique can be the used with the "Unfold" tool as well.  Enjoy.