Using the Patterning Command in Autodesk Fusion 360

In Autodesk Fusion 360 patterning can be done in both the sketch and modeling environment.  As a best practice, patterning should be done in the modeling environment.  The only good reason to use patterning in the sketch environment is when you would like to use the patterned sketches for different modeling operations.

When you pattern in the modeling environment you normally will select features when creating a pattern.  If you want to use the "pattern on path" method, you must select feature faces.  You will get odd results if you select features using this method.

Take a look at the short video to see the various methods of patterning.  Pay close attention to the method of determining the path length when using "Extents" as the Distance Type in the video.