Many Fusion 360 assembly contain multiple sheet metal components and their flat patterns. In this video I will show a workflow to place all of these flat patterns into a single assembly, then use the new Fusion 360 Arrange command to position them on a single sheet in the manufacturing environment. Once arranged, applying cutting toolpaths is a quick process. I want to point out that the Arrange command is not available to users of a Fusion 360 Personal License.
Tuesday, October 27, 2020
Friday, October 23, 2020
Creating a Functional Linear Slide Bearing in Autodesk Fusion 360
When creating an assembly which requires linear slide bearings you would like to know how to quickly add joints, to a download bearing, to make it fully functional. This video will show your how.
Saturday, October 10, 2020
Creating a Slider Joint Between a V-Groove Wheel and V-Track in Autodesk Fusion 360
A popular type of guided track used in assemblies is a V-Groove Wheel and a V-Track. If you have tried to add a Slider joint in Fusion 360, you find yourself wondering where the joint origins will be placed. In this video, I go through my process of defining these points and then applying the Slider joint.
Sunday, September 20, 2020
Creating a "Dumb" Solid of Your Detail Assembly in Fusion 360
There will be times when you need to share a representation of an Autodesk Fusion 360 assembly to a client or another party. You want to give them a very accurate representation of the assembly but you want to strip out all the internal detail and also take away the ability to "reverse" engineer your hard work. If this is the case, the process outlined in this short video is for you. One note, this process will only work with assemblies that have been created with Capture Design or in other words you have a timeline.
Friday, September 4, 2020
Creating Broken View Drawings in Autodesk Fusion 360
Autodesk Fusion 360 currently does not have the ability to create broken views in 2D drawings. In my video I would like to show my "workaround" method for creating broken views in your drawings. Please note in the video the step that may be included if you desire to have a complete assembly view as well as the broken views in your drawing.
I would like to give a big thank you to Maksims Jakovlevs for the use of his cylinder model.






